Safety Recall NHTSA · 03V313000 Reported August 26, 2003

Smith/spring brake control valve

Smith Co Manufacturing · Service Brakes, Air · 995 vehicles potentially affected

NHTSA ID
03V313000
Manufacturer Campaign
NR (Not Reported)
Component
Service Brakes, Air
Vehicles Affected
995
Recall Type
Vehicle
Report Received
August 26, 2003

Defect Summary

On certain trailers equipped with sealco spring brake control valve assemblies incorporated in arvinmeritor axles, part nos. 110700 and 110800, there is a recessed area on top of the valve in which a brass guide pin fits down inside the body of the valve and is held in place by a steel snap ring. the recessed area allows accumulation of water, dirt, and/or chemicals to build up behind the snap ring to the point where it will no longer contain the guide pin resulting in a failure of the air valve.

Safety Consequence

Failure of the valve in an empty or lightly loaded trailer while the vehicle is in motion could result in a hard application of the spring brakes, possibly locking up the trailer wheels and resulting in a vehicle crash.

Corrective Action

Sealco will provide a repair kit and installation instructions to customers free of charge. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact sealco at 602-253-1007 or smith at 712-546-4409.

What you should do

  1. Look up your VIN at nhtsa.gov/recalls to confirm this recall applies to your vehicle.
  2. Contact an authorized Smith Co Manufacturing dealer and reference recall ID 03V313000 or campaign NR (Not Reported).
  3. Schedule the free repair. By federal law, the manufacturer must remedy the defect at no cost.
View Official NHTSA Notice →
Related

Similar Recalls

Other recalls from Smith Co Manufacturing or involving Service Brakes, Air.

FAQ: Recall 03V313000

Your rights, the repair process, and what each field on this page means.

What is recall 03V313000?

NHTSA recall 03V313000 was issued by Smith Co Manufacturing on August 26, 2003. It addresses: Smith/spring brake control valve. The recall affects approximately 995 vehicles, with the defect involving the Service Brakes, Air component.

How do I get this recall repaired?

Contact any authorized Smith Co Manufacturing dealer and reference NHTSA recall ID 03V313000 or the manufacturer campaign number NR (Not Reported). Under federal law, the repair is completely free regardless of vehicle age or owner history.

Is my vehicle included in this recall?

The only way to confirm is to look up your 17-character VIN at nhtsa.gov/recalls. NHTSA's tool will tell you if VIN-by-VIN this exact recall applies.

How long do I have to get a recall repair done?

There is no expiration on most federal safety recalls. Even if your vehicle is years old and you bought it used, the manufacturer is required to perform the repair at no cost.

Where does the data on this page come from?

All information on this page is sourced directly from the U.S. Department of Transportation public dataset for NHTSA recalls. Last refreshed: 2026-05-22. For the most current official notice, visit nhtsa.gov/recalls.