Safety Recall NHTSA · 04E010000 Reported February 5, 2004

Safety check systems/brake clevis pin breaks

Mr. Safety Check Systems, Inc. · Service Brakes, Air · 2,268 vehicles potentially affected

NHTSA ID
04E010000
Manufacturer Campaign
NR (Not Reported)
Component
Service Brakes, Air
Vehicles Affected
2,268
Recall Type
Equipment
Report Received
February 5, 2004

Defect Summary

Standard ½" greasable clevis pins for use between the slack adjuster and the brake chamber pushrod, part nos. 80321 and 80322. these pins can also be used in certain trailer gauge kits, part nos. 16362 and 16382. this batch of clevis pins were heat treated between september 23 and december 2, 2003, to obtain a case hardness. the clevis pins can break and work its way out, making the brake inoperable.

Safety Consequence

Loss of brakes would increase the vehicle stopping distance, possibly resulting in a vehicle crash.

Corrective Action

Mr. Safety check systems will notify its customers and replace the clevis pin free of charge. owner notification began january 5, 2004. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact safety check systems toll-free at 800-552-4696 or visit their website at www.safetychecksystems.com.

What you should do

  1. Look up your VIN at nhtsa.gov/recalls to confirm this recall applies to your vehicle.
  2. Contact an authorized Mr. Safety Check Systems, Inc. dealer and reference recall ID 04E010000 or campaign NR (Not Reported).
  3. Schedule the free repair. By federal law, the manufacturer must remedy the defect at no cost.
View Official NHTSA Notice →
Related

Similar Recalls

Other recalls from Mr. Safety Check Systems, Inc. or involving Service Brakes, Air.

FAQ: Recall 04E010000

Your rights, the repair process, and what each field on this page means.

What is recall 04E010000?

NHTSA recall 04E010000 was issued by Mr. Safety Check Systems, Inc. on February 5, 2004. It addresses: Safety check systems/brake clevis pin breaks. The recall affects approximately 2,268 vehicles, with the defect involving the Service Brakes, Air component.

How do I get this recall repaired?

Contact any authorized Mr. Safety Check Systems, Inc. dealer and reference NHTSA recall ID 04E010000 or the manufacturer campaign number NR (Not Reported). Under federal law, the repair is completely free regardless of vehicle age or owner history.

Is my vehicle included in this recall?

The only way to confirm is to look up your 17-character VIN at nhtsa.gov/recalls. NHTSA's tool will tell you if VIN-by-VIN this exact recall applies.

How long do I have to get a recall repair done?

There is no expiration on most federal safety recalls. Even if your vehicle is years old and you bought it used, the manufacturer is required to perform the repair at no cost.

Where does the data on this page come from?

All information on this page is sourced directly from the U.S. Department of Transportation public dataset for NHTSA recalls. Last refreshed: 2026-05-22. For the most current official notice, visit nhtsa.gov/recalls.