Brake master cylinder fluid indicator switch
Defect Summary
Brake parts inc. (bpi) is recalling certain hydro-max brake master cylinders branded as raybestos p/n mc390565, napa p/n 390565, carquest p/n e151557, and gm ac delco p/n 18m870. these cylinders contain a 2.0 inch bore and 84 cubic inch reservoir equipped with a brake fluid level indicator switch and without a differential pressure switch, manufactured between july 1, 2011 and april 12, 2012. the brake fluid level indicator (fli) may not properly detect a low brake fluid level situation and warn the driver.
Safety Consequence
If the brake system develops an external leak, it may result in a loss of brake fluid below the detection level of the fluid indicator switch. without a warning, the driver may be unaware that the brake fluid level is low. a low brake fluid level may reduce the available braking force which could lengthen the required stopping distance and increase the risk of a crash.
Corrective Action
Bpi will notify customers and replace the fluid level indicator switch free of charge. the recall began in june 2013. owners may contact bpi at 1-815-363-9000.
Similar Recalls
Other recalls from Brake Parts Inc. or involving Service Brakes, Hydraulic.
FAQ: Recall 13E026000
Your rights, the repair process, and what each field on this page means.
What is recall 13E026000?
NHTSA recall 13E026000 was issued by Brake Parts Inc. on May 29, 2013. It addresses: Brake master cylinder fluid indicator switch. The recall affects approximately 624 vehicles, with the defect involving the Service Brakes, Hydraulic component.
How do I get this recall repaired?
Contact any authorized Brake Parts Inc. dealer and reference NHTSA recall ID 13E026000 or the manufacturer campaign number NR (Not Reported). Under federal law, the repair is completely free regardless of vehicle age or owner history.
Is my vehicle included in this recall?
The only way to confirm is to look up your 17-character VIN at nhtsa.gov/recalls. NHTSA's tool will tell you if VIN-by-VIN this exact recall applies.
How long do I have to get a recall repair done?
There is no expiration on most federal safety recalls. Even if your vehicle is years old and you bought it used, the manufacturer is required to perform the repair at no cost.
Where does the data on this page come from?
All information on this page is sourced directly from the U.S. Department of Transportation public dataset for NHTSA recalls. Last refreshed: 2026-05-22. For the most current official notice, visit nhtsa.gov/recalls.