Safety Recall NHTSA · 14E066000 Reported September 29, 2014

Pressure relief valve may break

Emerson Process Mgmt Regulator Tech. Inc · Fuel System, Other · 300 vehicles potentially affected

NHTSA ID
14E066000
Manufacturer Campaign
NR (Not Reported)
Component
Fuel System, Other
Vehicles Affected
300
Recall Type
Equipment
Report Received
September 29, 2014
Completion Rate
17.67

Defect Summary

Emerson process mgmt regulator tech inc. (emerson) is recalling certain fisher, two-inch, h282, h882, h5112, and h8112 pressure relief valves manufactured january 1, 2003, to july 3, 2014, and used in cargo tank trailer applications. the affected relief valves may break, causing the upper portion of the valve to separate from the stem, and possibly be ejected upward from the tank.

Safety Consequence

If the relief valve breaks, an uncontrolled release of pressurized gas into the atmosphere may result increasing the risk of personal injury or fire. additionally, the ejected valve could become a road hazard, increasing the risk of crash.

Corrective Action

Emerson will notify owners, and dealers will replace the two-inch, h282, h882, h5112, and h8112 valves being used in cargo transport applications with a redesigned pressure relief valve, free of charge. the recall began on december 10, 2014. owners may contact emerson customer service at 1-888-237-1751.

What you should do

  1. Look up your VIN at nhtsa.gov/recalls to confirm this recall applies to your vehicle.
  2. Contact an authorized Emerson Process Mgmt Regulator Tech. Inc dealer and reference recall ID 14E066000 or campaign NR (Not Reported).
  3. Schedule the free repair. By federal law, the manufacturer must remedy the defect at no cost.
View Official NHTSA Notice →
Related

Similar Recalls

Other recalls from Emerson Process Mgmt Regulator Tech. Inc or involving Fuel System, Other.

FAQ: Recall 14E066000

Your rights, the repair process, and what each field on this page means.

What is recall 14E066000?

NHTSA recall 14E066000 was issued by Emerson Process Mgmt Regulator Tech. Inc on September 29, 2014. It addresses: Pressure relief valve may break. The recall affects approximately 300 vehicles, with the defect involving the Fuel System, Other component.

How do I get this recall repaired?

Contact any authorized Emerson Process Mgmt Regulator Tech. Inc dealer and reference NHTSA recall ID 14E066000 or the manufacturer campaign number NR (Not Reported). Under federal law, the repair is completely free regardless of vehicle age or owner history.

Is my vehicle included in this recall?

The only way to confirm is to look up your 17-character VIN at nhtsa.gov/recalls. NHTSA's tool will tell you if VIN-by-VIN this exact recall applies.

How long do I have to get a recall repair done?

There is no expiration on most federal safety recalls. Even if your vehicle is years old and you bought it used, the manufacturer is required to perform the repair at no cost.

Where does the data on this page come from?

All information on this page is sourced directly from the U.S. Department of Transportation public dataset for NHTSA recalls. Last refreshed: 2026-05-22. For the most current official notice, visit nhtsa.gov/recalls.