D-ring installed too close to mounting flange
Defect Summary
Braun ambulances (braun) is recalling certain 2019 and 2021 crestline ccl150 type iii e-series and 2019-2020 crestline ccl150 type i f-series and ccl150 type iii g-series ambulances. two of the eight fastening points of the seat belt system installed in the ambulance patient compartment side-facing cpr seating position on the street-side of the vehicle may be defective. two of the threaded inserts used for the rearward retractor and shoulder belt d-ring are installed too close to a mounting flange resulting in improper crimping of the threaded insert.
Safety Consequence
The improper crimping may result in partial or complete loss of effectiveness of the seat belt harness, increasing the risk of injury to the occupant in that seated position, in the event of a crash.
Corrective Action
Braun will notify owners and dealers will inspect both seat belt anchor points and if no defect exists, no further action will be required. If the inspection shows the defect exists on one or both seat belt anchor points, your dealer will replace the defective insert(s) with nut plate(s) during the inspection, free of charge. the recall began on march 1, 2021. owners may contact braun ambulances customer service at 1-877-344-9990.
Similar Recalls
Other recalls from Braun Industries, Inc. or involving N/A.
FAQ: Recall 21V003000
Your rights, the repair process, and what each field on this page means.
What is recall 21V003000?
NHTSA recall 21V003000 was issued by Braun Industries, Inc. on January 8, 2021. It addresses: D-ring installed too close to mounting flange. The recall affects approximately 61 vehicles, with the defect involving the N/A component.
How do I get this recall repaired?
Contact any authorized Braun Industries, Inc. dealer and reference NHTSA recall ID 21V003000 or the manufacturer campaign number NR (Not Reported). Under federal law, the repair is completely free regardless of vehicle age or owner history.
Is my vehicle included in this recall?
The only way to confirm is to look up your 17-character VIN at nhtsa.gov/recalls. NHTSA's tool will tell you if VIN-by-VIN this exact recall applies.
How long do I have to get a recall repair done?
There is no expiration on most federal safety recalls. Even if your vehicle is years old and you bought it used, the manufacturer is required to perform the repair at no cost.
Where does the data on this page come from?
All information on this page is sourced directly from the U.S. Department of Transportation public dataset for NHTSA recalls. Last refreshed: 2026-05-22. For the most current official notice, visit nhtsa.gov/recalls.