Safety Recall NHTSA · 94E014000 Reported May 16, 1994

Steering:yoke (motorcycle)

Ohlins Racing Ab · Steering · 491 vehicles potentially affected

NHTSA ID
94E014000
Manufacturer Campaign
NR (Not Reported)
Manufacturer
Component
Steering
Vehicles Affected
491
Recall Type
Equipment
Report Received
May 16, 1994

Defect Summary

The one-way valve in the steering dampers is used to control the hydraulic oil flow so that the oil volume inside the steering damper expands with temperature. The valve seat can become deformed during use, causing uncontrolled restriction of the oil flow. The deformed valve causes the internal pressure on the damper oils seals to increase from increased oil temperature and volume expansion.

Safety Consequence

The deformed valve seat causes increased friction forcecausing very hard damping, and could, in a severe case, cause loss of steeringcontrol and an accident.

Corrective Action

The one-way valve will be replaced.

What you should do

  1. Look up your VIN at nhtsa.gov/recalls to confirm this recall applies to your vehicle.
  2. Contact an authorized Ohlins Racing Ab dealer and reference recall ID 94E014000 or campaign NR (Not Reported).
  3. Schedule the free repair. By federal law, the manufacturer must remedy the defect at no cost.
View Official NHTSA Notice →
Related

Similar Recalls

Other recalls from Ohlins Racing Ab or involving Steering.

FAQ: Recall 94E014000

Your rights, the repair process, and what each field on this page means.

What is recall 94E014000?

NHTSA recall 94E014000 was issued by Ohlins Racing Ab on May 16, 1994. It addresses: Steering:yoke (motorcycle). The recall affects approximately 491 vehicles, with the defect involving the Steering component.

How do I get this recall repaired?

Contact any authorized Ohlins Racing Ab dealer and reference NHTSA recall ID 94E014000 or the manufacturer campaign number NR (Not Reported). Under federal law, the repair is completely free regardless of vehicle age or owner history.

Is my vehicle included in this recall?

The only way to confirm is to look up your 17-character VIN at nhtsa.gov/recalls. NHTSA's tool will tell you if VIN-by-VIN this exact recall applies.

How long do I have to get a recall repair done?

There is no expiration on most federal safety recalls. Even if your vehicle is years old and you bought it used, the manufacturer is required to perform the repair at no cost.

Where does the data on this page come from?

All information on this page is sourced directly from the U.S. Department of Transportation public dataset for NHTSA recalls. Last refreshed: 2026-05-22. For the most current official notice, visit nhtsa.gov/recalls.